|
580ex2 C.Fn
Custom functions.
0 - Distance display: metres or feet.
1 - Auto-power off: on, off.
2 - Modelling flash: available via DOF preview button, available via test button, available with both, not available (if you want to check depth of field without firing flashes).
3 - Automatic cancellation of flash exposure bracketing (FEB) after three frames: on or off.
4 - FEB sequence: normal, -, + or -, normal, +.
5 - Flash metering: E-TTL/E-TTL II, TTL-only, external metering auto, external metering manual.
6 - Quickflash with continuous shot: disabled, enabled.
7 - Test firing with autoflash: 1/32 power, full power.
8 - AF assist beam: enabled/disabled.
9 - Automatic compensation for image sensor size when available: enabled/disabled.
10 - Slave unit auto power off: activate after 60 mins or 10 mins of inactivity.
11 - Cancellation of slave\'s auto power off: can be cancelled by master within 8 hrs/1 hr.
12 - Flash recycling when using high voltage port: use both internal batteries and high voltage port, use high voltage port only. (note that flash needs working internal batteries to run, even if it\'s connected to a battery pack)
13 - Flash exposure compensation: use dial and button/ dial only.
[ 本帖最後由 chenwu 於 2007-5-3 23:25 編輯 ] |
|