|
|
EOS 5D Mark II Firmware Update Version 2.0.8
What are the changes in Version 2.0.8 firmware?
The following improvements and fixes have been incorporated.
1. Fixes a phenomenon *1) in which movies are not taken at the shooting mode registered in the user\'s settings if a shooting mode Aperture priority (or Shutter priority) is registered in any of the camera\'s user settings (C1, C2, C3) and the user attempts to shoot a movie.
*1) This phenomenon occurs with cameras that have the Version 2.0.3 / 2.0.4 / 2.0.7 firmware.
2. Fixes a phenomenon in which the shutter will not release when pressing the shutter button when the auto power off function is set to \"on\". It occurs due to the communication between the camera and the lens or the flash or due to the CF card.
3. Fixes a phenomenon *2) in which overexposure occurs when shooting a Live View shooting simulation with the ISO speed set to L.
*2) This phenomenon only occurs when the EF 2x extender is used, the camera\'s ISO speed is set to L (Low), and the shooting mode is set to P (Program AE).
4. Fixes a phenomenon in which the settings of the Speedlite transmitter ST-E2 revert to the default settings when both the camera and the ST-E2 are set to auto power off.
5. Fixes a phenomenon in which the Macro Ring Lite (MR-14EX, MT-24EX) and slave flash do not sync while shooting wirelessly.
網路上翻譯一下...
下面的改進和修正已被納入。
1。修復的現象 * 1），其中電影不採取在拍攝模式中註冊用戶的設置如拍攝模式光圈優先（或快門優先）是註冊於任何相機的用戶設置（C1和C2，C3）和本用戶嘗試拍一部電影。
* 1）這種現象發生在相機具有版本2.0.3 / 2.0.4 / 2.0.7固件。
2。修復的現象，不會釋放快門時，按下快門按鈕時自動關閉電源功能設定為“開”。它的發生是由於通訊相機與鏡頭或閃光燈或由於 CF卡。
3。修復的現象 * 2）在拍攝時的曝光過度出現一個模擬的實時顯示拍攝的ISO感光度設置到L
* 2）這種現象只發生在2倍的EF擴展使用時，相機的ISO感光度設置為 L（低），以及拍攝模式設定為 P（程序自動曝光）。
4。修復的現象，其中設置了閃光燈信號發射器ST段素E2恢復到默認設置時會在相機和ST - E2是設置為自動關機。
5。修復的現象，其中微距環形閃光燈（先生- 14EX和MT - 24EX）和從屬閃光拍攝時不同步無線。 |
|
發表於 2010-10-19 09:31
置頂卡
變色卡
樓主